This command attaches a strata name to a 3D polyline that represents the bottom elevation, top elevation or the thickness of that strata. When modeling the drillholes, each point in these strata polylines is used as an elevation or a thickness data point for the assigned strata. For example, a 3D polyline for the outcrop of a strata could be tagged with the strata name and used in processing for additional model enhancement. If bed names are used, be sure to include the _TOP, _KEY, _PARTING or _BOTTOM extensions to the bed name.
Strata name: Seam1
Type of strata polyline [<Elevation>/Thickness]?
press Enter for
Elevation
Elevation reference
[<Bottom>/Top]? press Enter for Bottom
Select strata bottom elevation
polylines.
Select objects: 1 found
Pulldown Menu Location: Drillhole
Keyboard Command: stratatag