Reserve Classification
The Reserve Classification procedure provides a report based on
the area of each zone. To convert the areas to tons, use the
Surface Mine Reserve Reporting (found in either the Geology or
Surface Mining module procedure) after using the Reserve
Classification routine. This routine can be run to define the
density of exploration data for thickness (which yields tons) and
also qualities dividing it into various zones based on the distance
to the closest drillhole. The reserve estimation is less reliable
when the closest drillhole is farther away. Typically the following
zones are defined by the following distances:
Measured <1320ft
Indicated >1320ft,
<3960ft
Inferred >3960ft,
<15840ft
Hypothetical
>15840ft
The first prompt is to create a new,
or select an existing Reserve Classification file *.RSV.
The next step is to define a strata name to search for in the
drillholes selected along with the quality name and name of the
grid file to use. The program processes each line in the list,
taking into account only drillholes which have strata specified and
calculating from the grid quality values for each zone.
- Strata: This window is
to choose a strata or bed name that appears in the drillholes to
classify.
- Quality: This is the
quality attribute to analyze, such as thickness, BTU, Calcium,
etc.
- Grid: This is the grid
name that has been created from the drillholes. It will compare
these modeled values with the occurrences and spacing in the
drilling.
- Match Both Strata and
Quality: This will make sure that the quality and strata
name both are defined in a drillhole. If just the strata name is
there, but no quality sample, then it will not be used as a sample
point that is measured.
- Inc/Excl Layer: These
are the layers that the perimeters are drawn in.
- Result Layer Prefix:
This is a prefix it will put in front of the output layer
names.
- Draw Polylines: This
will draw the perimeter polylines that contain the hatching for the
four classifications.
- Draw Hatch: This will
draw the hatching inside the perimeters and boundaries of
classifications.
- Skip Report: This
option just does the CAD graphics and mapping only, not generating
the report.
- Assign Pit Names: This
option will give a Pit Name to each perimeter, so it may be used
for other volume calculations with commands such as Surface Mine
Reserves.
The command uses property lines, or at the least, an inclusion
polyline, to define the extent of the area of reserve. Nothing will
be calculated if there is no property line or standard inclusion
perimeter selected, and the following error will appear.
The owner name associated with the property line will also be
reported, making estimation of royalties an easy task. Optionally,
the inclusion perimeter may be specified to limit area of
calculations.
The results are shown as colored maps layerized by the chosen
quality, with color changing based on the corresponding reserve
class.
The report is show below using the Ascii Text report option:
Reserve
Classification
Wed Jun 04 15:40:18 2014
Owner
Harvey
Property
BR549
Strata
name
WK6_KEY
Quality
Thickness
Quality
Grid
C:\2012 UG\Reserve Classification\WK6_KEY_THK.GRD
Average Value
2.9
Total Area (sq.ft) 28953106.4
Measured Area (sq.ft) 12898291.2
Measured Acres
296.1
Measured Value
2.731
Indicated Area (sq.ft) 16054819.9
Indicated Acres 368.6
Inferred Area (sq.ft) 0.0
Inferred Acres
0.0
Hypoth. Area (sq.ft) 0.0
Hypoth. Acres
0.0
Indicated Value 2.974
Owner
LLoyd
Property
ABC
Strata
name
WK6_KEY
Quality
Thickness
Quality
Grid
C:\2012 UG\Reserve Classification\WK6_KEY_THK.GRD
Average Value
2.6
Total Area (sq.ft) 3850616.2
Measured Area (sq.ft) 3850616.2
Measured Acres
88.4
Measured Value
2.628
Indicated Area (sq.ft) 0.0
Indicated Acres 0.0
Inferred Area (sq.ft) 0.0
Inferred Acres
0.0
Hypoth. Area (sq.ft) 0.0
Hypoth. Acres
0.0
Indicated Value
Prompts
Select Reserve File dialog
Reserve Classification dialog
Select Drillholes to process: select drillholes to use in
calculations
Select Inclusion polyline:
Report Formatter Dialog
Pulldown Menu Location: StrataCalc
Keyboard Command: reserve_class