This command reports and labels the value of grids at user-specified points. Up to nine grids can be analyzed at a time. After loading the grids, the program will display each grid value at the current cursor position in real-time as you move the cursor. The values are displayed in a pop-up window that appears in the top left corner, but can be moved around.
The grids to inspect are specified in the dialog shown below.
You can either type in the grid file name or pick the Select File
button to choose the grid file. To remove a grid from processing,
erase the grid file name or pick the Clear button to remove all the
grids from the dialog. The Load Model button lets you select grid
files from the list of grids stored in a Geologic or Mining Model
file. The Name field is used for labeling the grid values. It will
default to the grid name, but may be edited.
When you
pick a point or enter coordinates, the program will label the grid
values and draw a symbol at the point. The Select Symbols option
will prompt you to select symbols from the drawing and the program
will label the grid values at each symbol position. For example,
you can use this option to quickly label the grid values at each
drillhole symbol.
Select Symbols/<Enter or pick point>: pick a
point
Select Symbols/<Enter or pick point>: press
Enter
Pulldown Menu Location: StrataCalc
Keyboard Command: grdvals