Place Pit/Channel Sample

This command creates channel samples at user-specified points and values. The command starts with a dialog to choose the symbol, symbol size, strata name and attribute names. The attribute names to assign are listed in order under the Used list. The Strata Thickness, Bottom Elevation and Top Elevation are the only pre-defined strata attributes. To add one of these attributes to the sample value list, highlight the attribute from the Available list and click Add. All other attributes are user-defined. To add a user-defined attribute, pick the Add Attribute button. Another dialog will appear for entering the attribute name. After filling out the dialog, pick OK. Then you pick the sample positions and enter the sample values at the prompting in the command line. Another option is to use the object snap and select something in the drawing with an elevation, such as a contour. The sample will then use that elevation, thickness or Z value for the sample value.

Prompts

Description <>:
Enter STRATA THICKNESS value: 3.2
Enter STRATA BOTTOM ELEV value: 4598.2
Enter CALCIUM value: 92.4
Pick channel sample location: press Enter

Pulldown Menu Location: Drillhole
Keyboard Command: chansam2