This command creates points in the current coordinate file (.CRD) for the strata data from the selected drillholes. The current coordinate file can be set with the Set Coordinate File command under Points. The x,y position for the point comes from the drillhole position. The z value can be the strata elevation, thickness or attribute. The points can be drawn on the screen in addition to being stored to the CRD file. There is an option to create composite values from multiple strata. The drillhole name can be used as the point number or the description of the points. If the drillhole is not used as the point description, then there is a prompt to specify the point descriptions.
Select drillholes and strata elevation polylines.
Select objects: pick the drillholes
Plot the points (<Yes>/No)? N for No
Create composite points (Yes/<No>)? press Enter for
No
Use drillhole names for [Point#/Desc/<None>]? press
Enter for None
Choose a Strata to Process dialog
Choose Value to Process dialog
Description for points <C2_KEY_BTU>: press
Enter
Pulldown Menu Location: Drillhole
Keyboard Command: chpts