This command has functions for using a geoid with points in the
current coordinate file.
Report: Reports the geoid heights at the points.
Add Geoid: Adds the geoid heights to the point
elevations.
Subtract Geoid: Subtracts the geoid heights from the point
elevations.
Switch To Target Geoid: Allows you to adjust the point
elevations to switch from one geoid to another. The geoid used with
the original point elevations is specified as the Source Geoid, and
the geoid to switch to is set by the Target Geoid.
Pulldown Menu Location:
Points > Point Utilities
Keyboard Command: geoid_util
Prerequisite: Points in coordinate file