Remove Points from Screen
This feature allows you to remove/erase specified points from the drawing.
Prompts
If a coordinate file is not open, a file dialog box will appear and allow you to open an existing coordinate file.
Using the standard C&G Select Points commands, select the points to be removed.
Type the Capped Letter to initialize the selection Set
[All/Block/Code/Desc/Elev/Pt_group/Limits/radius/select]:
A
Press <Enter> 3X when done:
The points will be removed from the screen.
Note
: Remove Points from Screen does NOT delete points from the coordinate file.
Pulldown Menu Location:
CG-Survey > CGDraw>Plot Points and Symbols
Keyboard Command:
RP, CG_REMOVE_POINTS
Prerequiste:
Coordinate file
Press
<Enter> 3X when done: The points will be removed from
the screen.Press
<Enter> 3X when done: The points will be removed from
the screen.