Point Label
This feature allows you to label a point using a leader instead of
the normal point labels. This feature can only be used with C&G
points. The leader will display the point ID and, if Elevation
and/or Descriptions are “On”, the elevation and description will be
displayed as well.
Prompts
It is suggested that you first plot the points on the screen with
the point labels turned off by setting their point label positions
to 0 on the Drawing Settings - Point Label Position dialog. Thus
only the symbols will be plotted. Next, in the Drawing Settings tab
of the CGOptions dialog box: turn on the items you want to be
displayed on the leader.
Now choose the Point Label Leader
menu item:
Pick start of leader: Move the cursor to a C&G point and
press the left mouse button. Picked C&G Point [3]
To point (Enter to end):Move the cursor to the end point of
the next leader segment and press the left mouse button. An
arrow will be drawn at the first point picked.
To point (Enter to end):
When you have picked the end of the last segment of the leader,
press <Enter> or the right mouse button.
To point (Enter to end):The
point attributes will be placed near the last point picked for the
leader.
(You may repeat the previous step as many times as is
necessary)
When done press
<Enter> when asked to pick the next C&G point,
Press Enter
Pulldown Menu Location:
CG-Survey > CGDraw>Leaders>Point Label
Keyboard Command: PTL,
CG_POINT_LEADER
Prerequiste:
Coordinate file