Import SketchUp File to Drawing

This command creates a CAD block from a SketchUp model and inserts this block into the drawing.
After selecting the .skp file to import, the options dialog shows the dimensions of the model at the top of the dialog.
Layer: Sets the layer for the block in the drawing.
Scale Factor: Allows resizing the model. For example, when the SketchUp model is in inches and the drawing in feet, use a scale factor of 0.0833333.
Prompt For Rotation: This option prompts to pick a second point for rotation of the block in the drawing.
Place Multiple: Sets whether to place a single block in the drawing or allow for drawing multiple copies.
Elevation By: The Pick method uses the elevation of the picked points. The Fixed method uses the Elevation from the dialog. The Surface method prompts for a grid or triangulation file to use for the elevation.

See http://www.sketchup.com/ for information on SketchUp and see https://3dwarehouse.sketchup.com/ for a collection of available SketchUp models.

Prompts

Select SketchUp File
Draw SketchUp Model dialog
Pick position: pick a point
Pick rotation: pick a point
Pick position (Enter to end): press Enter

Pulldown Menu Location: BIM
Keyboard Command: skp2dwg
Prerequisite: .skp file