This routine calculates section and 1/4 section
corners by one way control. First, enter the point number for Point
A. This number can be entered in manually or picked from the screen
by selecting the Pick radial button at bottom right. In a like
manner, the Bearing from A to B can be entered manually or by using
the Pick radial button to pick from the screen. The distance from A
to X can be specified in the same manner as above. After selecting
OK, a dialog box will display where the Point number, description
and elevation can be edited. The point default settings determine
the available data for editing. For example, if the option for
Automatic Point Numbering is turned off in the Point Defaults, then
the field for the point number will be grayed out. If elevations
are turned off in the point defaults, then the elevation field with
be grayed out. This also applies to the description of the point as
well.
GLO Proportioning One Way Control dialog
Saving Point dialog
Pulldown Menu
Location: COGO > Section Corners > GLO Corner
Proportioning
Keyboard Command: cg_glo_one_way
Prerequisite: A coordinate
file