There are three commands for managing fence polylines. The fence
polylines are used by the Fence Diagram command as the horizontal
alignment. You can run Fence Diagram without pre-defined fence
polylines and pick the alignment polyline on-the-fly. One advantage
with using fence polylines is that you can specify the alignment
polyline once and then more easily select the fence polyline in
Fence Diagram which is useful if you run Fence Diagram multiple
times for the same alignment. Another advantage is that you can use
fence polylines to run Fence Diagram on multiple alignments at the
same time.
The fence polyline commands are Tag, Untag and Identify. The Tag
Fence Polylines command prompts you to pick a polyline and give it
a name. This polyline is then flagged as a fence polyline. The
Untag Fence Polylines command removes the tags from the selected
polylines. The Identify Fence Polylines command reports the name of
the fence polyline. For Identify, you can either report the names
for the individually picked polylines or have the program search
the whole drawing and report the locations and names for any fence
polylines.
Pulldown Menu Location: StrataCalc
Keyboard Command: tag_fence_cl, untag_fence_cl,
id_fence_cl
Prerequisite: None