This command creates channel samples at user-specified points
and values. The command starts with a dialog to choose the symbol,
symbol size, strata name and attribute names. The attribute names
to assign are listed in order under the Used list. The Strata
Thickness, Bottom Elevation and Top Elevation are the only
pre-defined strata attributes. To add one of these attributes to
the sample value list, highlight the attribute from the Available
list and click Add. All other attributes are user-defined. To add a
user-defined attribute, pick the Add Attribute button. Another
dialog will appear for entering the attribute name. After filling
out the dialog, pick OK. Then you pick the sample positions and
enter the sample values at the prompting in the command line.
Another option is to use the object snap and select something in
the drawing with an elevation, such as a contour. The sample will
then use that elevation, thickness or Z value for the sample
value.
Description <>:
Enter STRATA THICKNESS value: 3.2
Enter STRATA BOTTOM ELEV value:
4598.2
Enter CALCIUM value: 92.4
Pick channel sample location: press Enter
Pulldown Menu Location: Drillhole
Keyboard Command: chansam2