This command highlights selected polylines that have
T-intersections with other polylines that are non-perpendicular.
For example, this command can be used to check that side lines for
lots are perpendicular to the frontage polyline. For every
non-perpendicular intersection, a temporary graphic arrow is drawn
and the angle and the coordinates of the point are reported at the
command line.
Select the polylines to check.
Select objects: pick
polylines to check
Warning: Polyline non-perpendicular by 0°00'47" at
5477.08,5047.53
Pulldown Menu Location: Edit > Polyline Utilities >
Check Polylines
Keyboard Command: highlight_nonperp
Prerequisite: Polylines