This command highlights selected polylines that have non-tangent
lineworks. For every non-tangent polyline, an arrow is pointed to
the first non-tangent point, and the non-tangent angle and the
coordinates of the point are reported at the command line.
Select polylines to check.
Select objects: 1 found
Select objects: 1 found, 1
total
Select objects:
press Enter to end
Polyline non-tangent by 32°15'26" at 1540.41,-182.05
Highlighted 1 non-tangent polylines.
Pulldown Menu Location: Edit > Polyline Utilities >
Check Polylines
Keyboard Command: highlight_nontangent
Prerequisite: Polylines