This command draws an arc given the PC point, radius length, and arc length. The PC point can either by picked on-screen or specified by point number. Given these points, the arc can be drawn clockwise or counterclockwise. The program shows one direction and asks if it is correct. If you need the arc to go the other direction, enter No.
Pick PC Point or point number: pick a point
Pick Radius point or point number: pick a point
Arc length <5.00): 150
Is this arc in the correct direction (<Yes>/No)? press
Enter
Pulldown Menu Location: Draw > Arc
Keyboard Command: pra
Prerequisite: None