This command fits a curve between two tangent lines by entering a known degree of curve. It prompts for the degree of curve and then prompts to pick points on the two tangent lines.
Degree of Curve (ddd.mmss)
<5.0000>: press Enter
Define by [C]hord or [A]rc length
<A>: press Enter
[nea on] Pick Point on 1st Tangent
Line: pick a point
[nea on] Pick Point on 2nd Tangent
Line: pick a point
Pulldown Menu Location: Draw > Arc
Keyboard Command: 2tanldo
Prerequisite: Tangent lines should be drawn before
execution