This command creates a point at the tangential intersection from
a point to another point and distance. This command prompts for a
base point and then the distance. Next there is a prompt for the
second point. Since there are two possible tangential solutions on
the circle from the base point, the program displays the two
possible solutions and prompts for which one to use. To choose the
solution, pick close to the solution point.
[Enter] to use preview point or select known base point
Pick point or point number: 1
Points/<Enter Distance>: 25
Second point.
Pick point or point number: 51
Pick tangent point solution: pick a point
Pulldown Menu Location: COGO > Locate at Intersect
Keyboard Command: tangint
Prerequisite: None