This command reports the slope distance, slope ratio, bearing, azimuth and vertical angle between two 3D points. Pick or enter the coordinates of two points or select a line or polyline segment to calculate between the segment endpoints.
Specify bearing-distance from
(Line/PLine/<Points>)? press Enter
Pick point or enter point number: pick a point
Pick second point or enter point number: pick a
point
Horiz Dist: 233.4 Slope Dist: 233.4 Elev Diff: 0.0 Vert Ang:
0d0'0"
Slope: 0.0% 0.0:1 Bearing: S 71d15'37" W Azimuth:
198d44'23"
Pulldown Menu Location: Inquiry
Keyboard Command: 3DIST
Prerequisite: None