Radial Stakeout
This feature allows you to obtain the angles required to stakeout
several foresight points from a single instrument point.
If a coordinate file is not open, a file dialog box will appear,
allowing you to open an existing coordinate file.
After following the prompts outlined below, the angles right from
the backsight point, the distances, the foresight point IDs, the
azimuths and the descriptions for all the selected points will be
printed at the command line and written to the print file.
You may press <F2> to view the complete listing of angles and
distances.
Repeat as necessary for as many setups as are required.
When done, press <Enter> to end the command.
Prompts
Choose initial points for base
selection set from coord file. (Enter when done)
[All/Block/Code/Desc/Elev/Pt_group/Limits/Radius/Select]:
Use one of several methods to specify the points in the coordinate
file to be staked out.
Enter the Instrument point
[Done]: Type or pick the instrument point.
Enter backsight point
[Done]: Type or pick the backsight point.
Pulldown Menu Location:
CG-Survey > Cogo > Stake-Out
Keyboard Command:
cg_rso
Prerequiste:
coordinate file