Drillhole Import
This command allows you import existing drillhole files. When you
select Drillhole Import from the Drillhole menu, a command prompt
shows:
"Use separate drillhole and strata files [Yes/<No>]?"
If you have two separate files, one with strata info, and the other
file has drillhole locations, select Yes. If you enter Yes,
the dialog box below appears.
This command creates drillholes from the data contained in text
files. Currently there are many company-specific
formats. A Drillhole Data File Formatter that is flexible to
handle almost any drillhole text file format is below. The format
to use is chosen in the dialog shown here.
The import text can have comma
delimited, space delimited or fixed width columns of data. All the
data for a record should be on one row. For the fixed width format,
choose the Fixed Width toggle and then enter the column numbers
separated by spaces in the edit box. For example, "8 15 24 32".
The Custom format can import all the drillhole and strata data
from one text file or the drillhole data from one file and the
strata data from another file. The method to use is set at the Use
separate drillhole and strata files prompt.
Use the following commands to prepare a file format that will match
the *.imp imported file.
● Add: Moves the
selected entry from Available to Used.
● Add
Attribute: Allows user input attributes into the Used
section.
● Add Skip:
Adds a "Skip" place holder in the Used List
● Remove: Moves
a selected item from Used to Available list.
● Move Up:
Moves the selected item up one place in the list.
● Move Down:
Moves the selected item down one place in the list.
● Comma
Delimited: Select this if your *.imp file has commas
separating each field.
● Single space
delimited: Select this if your *.imp has a space
separating each field.
● Tab
delimited: Select this if your *,imp file has tabs
separating each field.
● Fixed widths:
Select this if your *.imp has a defined width of space separating
each field.
● Auto Fixed
widths: Select this to automatically determine the
fixed widths that separate each field in the *.imp file.
● Header Lines to
Skip: If your *.imp file has header lines, enter the
number of header lines here.
● Load: Takes
you to select/brows for your *.imp file.
● Save: This
command will save your imported file as a *.imp file.
The dialog box below details the drillhole import
options.
In addition
to the previously listed import commands above, this dialog box
also has the following prompts:
● Avoid Duplicate Strata
Names: Select this to prevent have more than one
strata with the same name.
● Strata on one
row: Select this option if all of your strata info is
on one row.
Keyboard Command:
tk_chimport
Prerequisite: drillhole
files