This command calculates and stores unknown corners that can be
calculated given the data specified.
The Section number, Township and Range must be entered first.
Next, specify the point IDs of corners that have been located in
the field.
Note: The choices in the Specify Field Located Corners section
of the dialog merely make it more convenient to enter the Section
& Quarter corners and the 1/16th corners. This choice allows
you to enter the corners in order by just typing the point ID of a
corner then just press enter to move to the next corner. You
may enter any type of corner located in the field by changing the
types of corners selection in the Specify Field Located Corners
section.
Next, enter the government chainages as required.
The calculated points will be plotted on the screen and saved to
the coordinate file.
For each calculated corner, the Saving Point dialog box will be displayed. Depending on the point default settings, this dialog may allow you to accept or change the default point ID. Also, Depending on the point default settings, the description and elevation may also be changed or accepted.
Pulldown Menu Location: COGO > Section Corners
Keyboard Command:
cg_section_subd
Prerequisite: Coordinate
File