This command creates
points by traversing by bearing and distance. The program starts by
prompting for a starting point. Then the bearing is entered as
either grid bearing or geodetic bearing for mean, forward or
backward. Then the distance is entered either as grid distance or
geodetic distance at mean elevation or zero elevation, and the
distance units can be either feet, meters or chains. The resulting
point is then drawn using the point settings from the Point
Defaults command. Before running this command, the grid projection
for the drawing must be defined in the Drawing Setup
command.
Pulldown Menu Location: COGO > Geodetic
Prerequisite: None
Keyboard Command: geotrav