Label Last Area

This command will label the last area calculated with one of the Area commands in the manner defined in the Area Defaults dialog. The command prompts for a point where the label will be centered.

Prompts

SQ. FEET: 50265.3  SQ. YARDS: 5585.0  SQ. MILES: 0.0
ACRES: 1.2  PERIMETER: 889.4
Lot Description <2>: 1
Pick area label centering point (Enter for none): pick a point

Pulldown Menu Location: Area/Layout
Keyboard Command: lastarea
Prerequisite: Set Area Defaults, and use one of the Area commands to calculate an area.