|
| Examples of switch bearing/azimuth quadrant |
This command switches the Bearing quadrant label or adds 180° to an Azimuth label. For example, N90°32'16"E would be replaced with S90°32'16"W or AZ 78°17'18" would be replaced with AZ 258°17'18". This routine changes bearing text to read as if the bearing were in the opposite direction.
Pick Bearing or
AzimuthText: pick text
Pick Bearing or
Azimuth Text: press Enter to end
|
|
| Examples of switch bearing/azimuth quadrant |
Pulldown Menu Location: Annotate > Flip Labels
Keyboard Command: brgquad
Prerequisite: bearing or azimuth label