This command allows the user to edit the properties of an entity
based line or curve table.
Label
Text Layer: determines the layer of the line/curve text.
Label Text Style: determines the style of the line/curve
text.
Label Text Size: determines the size of the line/curve
text.
Line Label Prefix: determines the prefix for each line.
Line Table Title: draws a title row at the top of the line
table with this string.
Table Text Layer: determines the layer of the line/curve table
text.
Table Text Style: determines the style of the line/curve
table text.
Table Text Size: determines the size of the line/curve table
text.
Curve Label Prefix: determines the prefix for each
curve.
Curve Table Title:
draws a title row at the top of the curve table with this
string.
Prompt for Label Location: prompts you to
pick the location to label each line or curve. If this is not
selected, the location is chosen automatically.
Under Line
Table Distance, the method for measuring distance is
specified.
Horizontal: The distance measured is only horizontal, even
if the line is a 3D polyline.
Slope: The distance measured is the slope distance,
used mostly for 3D polylines to get their true length.
Under Label Angles in, the type of angle is
selected.
Azimuths: The angles are reported as azimuth.
Bearings: The angles are reported as bearings.
Gons: The angles are reported as gons.
Under Automatic Table Update, the option automatically inserts the entry into the line or curve table. The auto update renumbers the other table entries and the associated labels in the drawing. For example, if a line table contained lines #1-5 and a line #4 was added, then the new line #4 would be inserted into the table, and the previous lines #4 and #5 would be updated to #5 and #6. The L4 and L5 labels on the lines would also be updated to L5 and L6. If you set the Automatic Table Update to Off, you must manually pick the entry location and update the labels. If Automatic Table Update is set to On, the table is updated automatically whenever the line is modified.
Label Alignment determines the orientation of the L# or C# that is labeled on the line or curve. Horizontal will make the label horizontal to the current screen alignment, Parallel will draw the label parallel to the line or curve chord. Under Curve Options, you specify which curve data to include in the table and the order.Selecting “Set Line Table Labels” will lead you to
the Line Table controls, as “Set Curve Table Labels” (see graphic
at end of this command page) leads to the Curve Table controls. For
fields that apply to the Report Scale Factor from Drawing Setup,
there is a second Scaled Label name for the table header. This
scale factor can be used for reporting both grid and ground or both
english and metric distances. The options in “Set Line Table
Labels” are shown below:
With the above settings, for example, the Line
Table appears as shown below. For improved “aesthetics”, you might
prefer to change the Bearing justification to “Center”, for
example.
To save space, you can reduce the
size of the “Distance” column from 11.5 to 10. Note that using the
Line Label Prefix option, L1 and L2, for example, can read Line1
and Line2, and for that, you may want to expand the “Width” setting
for the Line column. The prefix flexibility, and the fact that the
text used for the column header can be changed, means that line
tables and curve tables can be plotted in any language. In Puerto
Rico, for example, surveys are typically conducted in bearings, in
meters and in Spanish. For that location, the table could be
reconfigured as shown here:
This would lead to the following line
table:
Note that changing the distance
suffix to “m” (or omitting any suffix by making it blank) is
accomplished in the more general command Annotation
Defaults.
Finally, below we see the
dialog that appears when you choose Set Curve Table Labels.