Quick Contours
This command draws contours for a selected triangulation model at a
given contour interval. The purpose of this routine is to quickly
get a picture of the surface model from the contours. The contours
are drawn as temporary graphics that get cleared when the display
is redrawn. To create contour entities, use other routines such as
Contour From TIN File or Triangulate & Contour.
Prompts
Select Triangulation
File
Choose the surface to contour
Contour interval <5.00>: press Enter
Pulldown Menu Location: Surface > Draw Surface
Keyboard Command: quickctr
Prerequisite: a surface file (.TIN, .FLT)