This command reports the cut/fill areas and volumes within given
ranges of slopes. There is an option to use another section for
cut/fill reference.
Select Section to Process
Select .SCT file
Select Slope Zone dialog
Report slope or horizontal area [<Horizontal>/Slope]?
S
Slope format [<Percent>/Ratio]? press
Enter
Greatest slope % of zone 1:
3
Greatest slope % of zone 2: press Enter
Starting station to process
<0.000>: press
Enter
Ending station to process <0.000>: 1000
The Standard Report Viewer
creates a report called Section Slope Zone Analysis
Report.