This command will create a section file at given cross slopes
and minimum overlay from a reference section file. An existing and
a proposed .SCT file must be selected, along with additional
section information. A choice between Overlay Value or Proposed
Elevation must be made. When the Overlay Value option is chosen, a
Minimum Amount of Overlay must be entered, and the Slope values
must be defined. You are allow to set up slope transition values
for certain station ranges. When the Proposed Elevation option is
chosen, a Proposed Centerline Elevation value must be
entered.
|
|
Overlay Section Data dialog
Select file names and options,
click OK
Report viewer creates a
proposed section file
report.
Pulldown Menu Location: Sections > Section
Utilities
Keyboard Command: sct_overlay
Prerequisite: A .SCT file