This command compared a base grade section (.SCT) file with a
final grade section (.SCT) file. It then reports the cut or fill
values between these two sections files. The cut and fills are
calculated at offsets in a specified range of stations. The report
shows a column of cut and fill values for each offset as shown
below. The two section .SCT files should have matching stations,
because the program compares the offsets and elevations of a
station in the first section file with the offsets and elevations
of the same station in the second section file. The Report
Formatter option allows for customized reports and output to
different formats such as Excel. Otherwise the standard report
shown here is generated.
Base Grade Section File dialog choose existing .SCT
file
Final Grade Section File dialog choose the other
existing .SCT file
Left offset: -10
Right offset: 10
Additional Offset (Enter to end): press Enter
Cut Sheet dialog
Cut Sheet Report
-10.000 +10.000
Station Offset CL Offset
25.00 +4.55 | +4.07
50.00 +21.10 | +21.95
75.00 +24.26 | +26.97
100.00 +30.63 | +33.54
125.00 +41.35 | +42.52
150.00 +49.61 | +50.55
175.00 +49.02 | +46.88
200.00 +43.65 | +45.45
225.00 +24.22 | +29.03
250.00 +7.44 | +7.27
275.00 +41.58 | +33.21
Pulldown Menu Location: Sections > Cut/Fill Analysis
Keyboard Command: cutsheet
Prerequisite: Two section .SCT files