After creating a regrade polyline with Design Regrade, this command will calculate how far and how much earth must be hauled in order to obtain the regrade from the existing grade. Areas from cut will be moved into areas of fill. In order to be optimal, this command expects even amounts of cut and fill. Haul factors measure the amount of earth moved times the distance. There is also an option to label the cut and fill areas.
Horizontal Scale <50.0>: press Enter
Vertical Scale <50.0>: press Enter
Select the existing grade polyline: pick the
polyline
Select the regrade polyline: pick the polyline
Label areas (<Yes>/No)? press Enter
Text size <4.00>: press Enter This defaults to
the horizontal scale times the text scaler.
Enter the report title <Haul report>: press
Enter
Write report to file (Yes/<No>)? press
Enter
Write report to printer (Yes/<No>)? press
Enter
Haul factors for a regrade:
Haul report
Haul factor 344.43, Amt 27.32, Dist 12.61 from cut 1 to fill 1
Haul factor 15.99, Amt 1.45, Dist 11.04 from cut 1 to fill 2
Haul factor 74.78, Amt 4.51, Dist 16.60 from cut 2 to fill 2
Haul factor 2339.17, Amt 58.07, Dist 40.28 from cut 2 to fill 3
Haul factor 2945.88, Amt 62.10, Dist 47.44 from cut 3 to fill 3
Haul factor 1038.63, Amt 11.20, Dist 92.72 from cut 4 to fill 3
Haul factor 116.30, Amt 6.09, Dist 19.09 from cut 4 to fill 4
Haul factor 50.81, Amt 2.99, Dist 16.98 from cut 4 to fill 5
Total cut: 173.73, Total fill: 174.93
Left over cut: 0.00, Left over fill: 1.20
Haul factor (dist*amt): 6925.98
Haul ratio (haul factor/total amt): 39.87
Pulldown Menu Location: Sections
Keyboard Command: haulfact
Prerequisite: Existing and final grade polylines