This command combines a range of stations of one profile and a range of stations of a second profile. The stations and elevations in these two ranges can be stored in new file or overwrite an existing profile. Both profiles must be the same type: generic, road, pipe, or sewer.
First Profile to Merge Select a profile.
Second Profile to Merge Select a profile.
Range of first profile stations to use <0.0 - 400.0>:
press Enter
Range of second profile stations to use <400.0 - 800.0>:
press Enter
Profile file to Save dialog box
Ranges can overlap, as shown below:
Range of first
profile stations to use <0.000 - 471.214>:
Range of second profile stations to use <450.000 -
480.000>:
In the case of overlap, all non-matching stations and elevations in
the two sets of profile ranges will be used in the final profile.
If matching stations are found, the elevations of the first and
second profiles will be averaged.
Pulldown Menu Location: Profiles > Profile
Utilities
Keyboard Command: mergepro
Prerequisite: Two profiles