Cut/Fill Centroids
This command finds the centroids for each cut and fill area between
two triangulation surfaces (.flt or .tin files), with options to
draw centroid boundaries, label centroid amounts (in cubic
yards for English units), and hatch the areas. Included is a
routine to find the optimum movement of the cut to fill volumes
which minimizes the total haul distance moved. This routine finds
all the areas of cut and fill, and locates the centroid for each
area.
Prompts
Cut & Fill Centroid Locator Dialog
Select Original Ground Surface Dialog Select an existing surface (.tin, .flt)
file
Select Design Surface Dialog Select an existing surface (.tin, .flt)
file
![](2008_report.png)
Pulldown Menu
Location: Surface >> Cut/Fill Utilities
Keyboard Command: cutfillc
Prerequisite: Two triangulation files, (.flt or
.tin)