This command draws and labels right of way polylines from data stored in a centerline (.CL) file. The right of way data consists of station and offset points for the left and right sides of the centerline. This data can be created with the Enter Right of Way or Polyline to Right of Way commands. Each right of way point is labeled with a leader that has the station on top and the offset on bottom. The station label is partial which only shows the number after the '+'.
Choose Centerline to Read Specify a centerline file.
Layer name for labels <ROW>: press Enter
Draw right of way polylines (Yes/<No>)? press
Enter
Number of decimal places <2>: press Enter
![]() |
Right of Way polylines and labels along a centerline |
Pulldown Menu Location: Centerline
Keyboard Command: drwrow
Prerequisite: A centerline file with right of way
data