Create Text
Selecting the Text button from the Create panel in the Action
Tab will open the Create Text dialog. The Current Mode will be
set to Text Creation.
Snap Mode
The Snap Mode Panel offers twelve different options for snapping
to points in the cloud in the open scene.
- None - No snap function is active. The text will be
placed at the cloud point nearest to the selected location.
- Low - The text is placed at the lowest point (smallest z
value) within the Snap Radius.
- High - The text is placed at the highest point (largest
z value) within the Snap Radius.
- Low Edge - Snaps to the low edge of a feature. A dynamic
window in the upper left of the scene displays a cross section of
the area within the Snap Radius and displays the high and low edge
as red squares.
- High Edge - Snaps to the high edge of a feature. A
dynamic window in the upper left of the scene displays a cross
section of the area within the Snap Radius and displays the high
and low edge as red squares.
- Slope Bottom - Snaps to the bottom edge of a slope that
is less than 45 degrees. This is useful for finding low edges on
mountable curbs and other non-vertical features.
- Slope Top - Snaps to the top edge of a slope that is
less than 45 degrees. This is useful for finding upper edges on
mountable curbs and other non-vertical features.
- Average Point - This snap averages Northing, Easting and
Elevation for all points within the Snap Radius and uses the
averaged values for the coordinate for the text.
- End Point - Snaps the text to the endpoint of existing
polylines.
- Mid Point - Snaps the text to the midpoint of existing
polylines.
- Node - Snaps the text to points placed in the drawing
using Carlson Point Cloud.
- Nearest - Snaps the text to the point on an existing
polyline nearest to the cursor location.
Create Text Panel
The Create Text Panel sets options for creating text in the
Point Cloud. Each option is discussed below.
Text - This is the text that will be placed in
the scene. The text will be a single line.
Leader Segments - This value specifies the number of
segments a leader will have. The text is placed at the segment
endpoint.
Text Size - text size is a fixed unit. This means that as
the user zooms in and out the text is always the same size on the
screen and not relative to the cloud.
Alignment - There are nine alignment options for the text
relative to the text location picked.
- Top Left
- Top Center
- Top Right
- Middle Left
- Middle Center
- Middle Right
- Bottom Left
- Bottom Center
- Bottom Right
Panel and Button: Create and Text
Prerequisite: Open Point Cloud Scene