This command reads a sewer network and displays every pipe segment in the Sewer Pipe Design dialog. From the Structure > Sewer Pipe Design menu in the Hydrology Module, select Sewer Network Segment. The function reads a sewer network file, conducts the hydraulic calculations and displays pipe parameters and results in the dialog. Pipes list contains all pipe segments, you can select any one of them to display its data. The pipe parameters are shown in the middle part of the dialog, and the results are shown in the bottom table. Load button loads another sewer network file, Report button reports current pipe information to the standard Carlson report, and Report All button reports all pipe data to the standard report.
|
|
| Sewer
Pipe Design: Sewer Network Segment |
Sewer Network Segment dialog: Fill in values.
Pulldown Menu Location: Structure > Sewer Pipe Design
> Sewer Network Segment
Keyboard Command: swrpipe3
Prerequisite: a sewer file (.SEW), ...\USER\RainLib.dta,
...\USER\inlet.dta, ...\USER\pipesize.dta (mpipesize.dta in Metric
unit)