This command reads a sewer network file and reports its design parameters and hydraulic results. Select Report Sewer Network from the Network menu in the Hydrology Module, the report dialog displays. The Select Sewer Line(s) To Report list displays all upstream entrance structure names, which represents pipe lines from every entrance to the outfall. Select one entrance to report one pipe line. If you want to report the whole sewer network, turn on the Report All Sewer Lines toggle.
The sewer network report has four categories: inlet, pipe,
structure and drainage, in order to report all information
thoroughly. Simple Report lists some portion of information
from all four categories, and Custom Report allows you to choose
which portion of data you would like to report from the combination
of drainage and pipe categories. Report HGL Computation lists the
result of the friction losses of every pipe and the junction losses
of every structure. Report Water Surface Elevation for Sag
Inlets lists the orifice and weir calculation of the sag
inlets. Report Lateral lists the data for lateral
connections.
Turn on the Use Report Formatter toggle will report the sewer network data in a Microsoft Excel spreadsheet, otherwise in the standard Carlson report window from where the information can be edited, printed to a printer or to the screen, and saved.
|
|
| Sewer Network Report |
|
|
| Sewer Network Report Example:
Inlet Report |
Report Sewer Network dialog: Fill in values.
Pulldown Menu Location: Network > Report Sewer
Network
Keyboard Command: reportswr
Prerequisite: a sewer file (.SEW), a surface file (.TIN,
.GRD)...\USER\RainLib.dta, ...\USER\inlet.dta,
...\USER\pipesize.dta (mpipesize.dta in Metric unit),
...\USER\swrStruct.dta