This function calculates strata qualities "as delivered" based on in place qualities. A Geologic Model file with all strata and quality grids specified is required to run the command.
The dialog below shows a typical use of the routine. The strata list displays all the strata defined in the Geologic Model file. To calculate "as delivered" qualities of the particular strata pick that strata from the list. Then fill out at least the Moisture field by picking the corresponding quality name from the list or by specifying a value if grid is not present. This allows the program to calculate dry qualities by picking a quality in pull-downs in the lower left corner and specifying an output grid file name in the corresponding dry grid line.
When Ash and BTU fields are filled out, dry Ash, dry BTU and
BTU(MAF) grids may also be calculated.
Repeat this procedure for every strata in the list for which dry
qualities are to be calculated by the routine. When finished click
on the OK button and all the required grids will be generated.
Select Geologic Model File Dialog
Select a file for Proximate Analysis (the .DIL File Dialog)
Pulldown Menu Location: StrataCalc
Keyboard Command: dilute1