This command sets the processing status of drillholes based on specified parameters. The processing status is set as ON or OFF which is used by Stratacalc routines to determine whether to include the drillhole in processing. Drillholes have processing ON by default. The drillholes that do not match the specified parameters are tagged as processing OFF. The Reset Selected Drillholes option at the start is a way to set the processing status of the selected drillholes to ON and start fresh, with them all set to ON.
Reset selected drillholes to processing on status
(Yes/<No>)? press Enter
Define Parameters Dialog
Analyze entire drillhole or specific strata
(<Drillhole>/Strata)? press Enter
Select the DrillHoles to test.
Select objects: pick the drillholes
Tagged 20 drillholes ON
Tagged 6 drillholes OFF
Pulldown Menu Location: Drillhole > Parameter
Compliance
Keyboard Command: charea4