This command will twist the screen orientation to where
something other than the north direction is toward the top of the
screen/drawing. It does not do a coordinate rotation, the drawing
coordinates remain unchanged. Use commands on the *Points* menu,
such as Rotate Points and Translate Points, if you
want to do a coordinate rotation or translation.
This routine prompts for the twist angle then adjusts the screen and cross-hairs to that angle. This is a modification of the DVIEW command. The twist angle is always measured counterclockwise with 0 degrees being to the east/right.
Pulldown Menu Location: View > Twist Screen
Keyboard Command: twist1
Prerequisite: None