This command will scale point attribute text (number, elevation and descriptions) and point symbols up or down in size. The routine prompts for a scale multiplier and a selection set of objects. If you want to enlarge, enter a value greater than one. If you want to reduce, enter a decimal fraction such as .5. This would reduce the text size by 50%. This command is very useful if you have set up your drawing for one plotting scale and decide to change to a new plotting scale. This command has the added benefit that it will adjust the point attributes and symbols to a new screen twist angle.
Scaling Multiplier <0.500>: 2.5 This
response would enlarge the point attributes and symbols by 250
percent.
Scale symbols only, point labels only or both
[Symbols/Labels/<Both>]? press Enter
Select points from screen, group or by point number
[<Screen>/Group/Number]? press Enter
Select Carlson Software points. pick a point
Select objects: Specify opposite corner: pick a
point
Scaling Carlson Software Point Attributes ....
Number of entities changed> 174
Pulldown Menu Location: Points
Keyboard Command: pntenl
Prerequisite: Carlson points