This command will edit the point number attributes of a group of
Carlson points. The command prompts for the user to enter the point
number difference. Enter the positive or negative amount you would
like to have added/subtracted from the current value. After
selecting the point to change, a prompt to delete the old point
number is displayed. If yes is chosen the old point number is
deleted from the CRD file, if no is selected the old and new point
numbers are retained in the file. This results in one coordinate
position represented by two point numbers.
The following illustrates number changes from point 4, 5 and 6 to 104, 105 and 106. This prompt sequence retains both numbers in the CRD file. If the intent is to renumber and delete the original points 4, 5 and 6, then Yes would be selected when prompted to Delete old point numbers.
Positive number increases,
negative number decreases Point number.
Point Number difference <1>: 100 This response
would add 100 to the current point number value.
Select Carlson Software Points for
Point Number change.
Select objects: select a point number or a group of
points by window or crossing
Delete old point numbers from file [<Yes>/No]? Choose
correct response. In this example the response was N, leading to
the following.
PT#: 6 changed to PT#: 106..
PT#: 5 changed to PT#: 105..
PT#: 4 changed to PT#: 104..
Number of entities changed: 3