This command erases Carlson points inserts from the drawing. The points to erase can either be selected from the screen or specified by point number, point number range or by point group. Erasing a Carlson point will erase the three entities that make up a Carlson point: the point symbol, point attributes, and point node. There is an option to skip erasing the point symbol in case you want to leave the symbols in the drawing. The points may optionally be erased from the coordinate file. As long as the points are not deleted from the coordinate file, they can be redrawn with Draw-Locate Points or Field-to-Finish.
Select points from screen, group or by point number
[Screen/Group/<Number>]? press Enter
Point numbers to erase: 1-5
Delete points from coordinate file [Yes/<No>]?
press Enter
Delete point symbols
[<Yes>/No]?press Enter
Erasing Carlson Points ....
Number of points erased> 5
Pulldown Menu Location: Points
Keyboard Command: DELPT
Prerequisite: Carlson points to be erased