This command shows your current position in either the drawing
view or a 3D view. For the drawing view, the coordinates of your
current position are shown in a dialog and an arrow icon is shown
in the drawing view. For the 3D view, use the Run button to get
position updates and use the Stop button to stop updates and use
the viewer controls to change to view.
This command only applies to GPS and robotic total stations. As you move along, the arrow icon will move through your drawing showing your position in real-time. If the arrow icon gets near the edge of the screen, Carlson Field will automatically pan over.
A dialog box also appears in Track mode. The dialog shows your
current northing, easting and elevation. For GPS mode, the dialog
displays the HRMS and VRMS values and solution
status. There are buttons to take you to Monitor and
Skyplot. There is also a Store button which will
store your current location as a point and plot it, similar to the
Point Store function.
Track Position in Drawing view mode