![](trav_07.bmp)
When using a description table, any INTEGER numbers
in the description field of the data coming from the data collector
will be replaced by the description in the table. For example, if
your description is "13 5", the description put in the coordinate
or raw data file will be "CL CMP".
Receiving Raw Data from the
SMI
![](Deans_trav_19.bmp)
Select the Receive raw data option on the
computer. On the SMI, select TOPC and then RAW. The transfer will
begin. The file name will be shown on the screen after the transfer
is complete. You may enter a new file name if you wish. Our
reduction program does not allow a raw data file with mixed angle
types (for example: azimuths, angles right, deflections, etc.).
When you are collecting data on the SMI, stick to one angle type.
You can mix distance types if you wish (slope/zenith,
horizontal/vertical).