Display Centerline Stations
This features allows you to view a list of the centerline stations
for a given point group.
In the file dialog select the point group file that defines the
alignment.
At the Enter Starting Station [Done] <1000>: prompt you will
notice that the subgroup name is used to determine the starting
station default value. To use the default value, press
<Enter>. You may also enter a new starting station for the
first point in the point group. For example, 24+34.12 is entered as
2434.12.
The centerline station information will be listed on the command
line and written to the print file.
The Enter Starting Station (Done) <0.00000>: prompt will
again be displayed at the command line, at this point you can
either enter another point group, or type in another starting
elevation. When done entering data, type D and <Enter> for to
end the command.
NOTE: The first line of the Point Group must be the beginning
station of the alignment. In any routine that computes or
requires stationing information the station numbers must be
relative to the stationing in the Point Group
file.
Prompts
At the Enter Starting Station
[Done] <1000>: Enter the starting station for the
alignment as a decimal number.
Pulldown Menu Location:
CG-Survey > Cogo > Station Offset
Keyboard Command:
cg_display_cl_sta
Prerequiste:
coordinate file, point group file defining an alignment