Draw Lot Setback

This command draws closed polylines inside lots to represent the building setback offsets. Before running this command, the lots need to be draw as closed polylines. The command starts with a dialog for entering the setback offsets and the layer for the new setback polylines. The Front to CL Max Offset is used to determine which lot edges are frontage. The program will prompt to select CL reference polylines and lot edges that are within this offset from these CL polylines are considered frontage edges. The Front Setback is applied to the lot frontage edges. The Side Setback offset is applied to lot edges that have only one of their ends within the frontage offset. The Back Setback offset is applied to all other lot edges.

Lot Setback Polylines dialog
Select reference centerline polylines.
Select objects: pick the polylines
Select lot polylines to setback.
Select objects: pick the polylines

Pulldown Menu Location: Area/Layout
Keyboard Command: lot_setback
Prerequisite: Lot and CL polylines