This command will label a coordinate on the screen. You can choose to label the northing and easting, the Z elevation, or all three properties. The point can be picked on screen, or specified by point number from the current coordinate (.CRD) file. Options include drawing a box around the label, labeling both feet and meters, setting the layer name for the label, setting the display precision, deciding whether or not to use a leader and selecting a change in the symbol used to mark the point. You can also set the text prefix and suffix for the label. Additionally, you can locate a label on Real Z Axis. The Label With Inches option labels with whole feet and inches for the decimal part. The Label Style chooses between labeling with a leader, with a symbol or along the x/y axis.
Label Along Axis
There is also an option to label the Delta X, Y and/or Z between
two points, which is called Label Delta Between Two Points. When
this option is clicked On, and after the prompt, you will first
click two points locations. The label, with the delta value(s),
will then be placed precisely in between these two pick locations.
If, for example, the North, East and Elevation button is chosen,
the resulting label will show the N, E and Z delta
values.
Label Coordinates/Elevation
dialog
Point to Label ?
Pick point or point number: pick a point
Point to Label (ENTER to End)?
Pick point or point number: press Enter
Pulldown Menu Location: Annotate
Keyboard Command: labcoor
Prerequisite: None