This command converts point data from an ASCII text file into the current Carlson coordinate (.CRD) file. Each line of the text file can contain any combination of point number, northing, easting, elevation and description. All point information should be on one line with the values separated by a comma, space or other delimiter. Under the Source File Format setting you can choose from some specific formats or User-Defined. For User-Defined, the format of the text file is specified in the Coordinate Order field where the value identifiers are listed with the appropriate delimiters. For example:
For a text file with northing, easting, elevation and comma
delimiters:
5100.0,5150.5,485.1
5127.1,5190.3,487.3
The Coordinate Order would be:
Y,X,Z
For a text file with point number, easting, northing, elevation,
description and space delimiters:
1 5000.0 5000.0 490.3 TRAV
2 5030.4 4930.5 495.5 TRAV
The Coordinate Order would be:
P X Y Z D
Common formats can be selected from the Common Format List. All
the lines in the text file should contain only point data and any
header lines should be removed. To read the text file, pick the
Select Text/ASCII File button and choose the file to read. Then the
selected file is displayed in the Preview Window to help with
filling out the Coordinate Order. When the Coordinate Order is set,
click OK to read the text file. The Wild Card Descriptions Match
allows for only point with matching descriptions to be imported.
With Point Protect active, the program will check if a point number
already exists in the CRD before importing the point. If a point
conflict is found, you can either assign a new point number or
overwrite the old point. The Value to Add to Point Numbers allows
you to renumber the points as they are imported. The Header Lines
to Skip value is the number of lines not to be processed at the
start of the text file. The Point Group To Assign option will
create a point group with the specified name for the coordinate
file containing the point numbers imported with Import Text/ASCII
File.
Multiple files can be imported at once. To do this, toggle on
the Enable Process Multiple Files option. After selecting the
Text/ASCII Files button, you can select multiple files by using the
Shift or Ctrl keys while picking files. You can also run Select
Text/ASCII Files multiple times allowing for selection of files
located in different locations. The files to import are listed in
the top scroll display window. The point data from all the import
files can be stored to the current CRD file or to separate files
for each import file. The separate file option will name the
resulting CRD files with the same name as the import file with a
.CRD file extension. For example, the import file job125.txt would
create job125.crd. The CRD file will be created in the same
location as that of the selected text file to import.
Under Process Options, there are choices for selecting the
coordinate file to store the imported points. The Current option
uses the current coordinate file that is active in the drawing.
This coordinate file name is shown at the bottom of the dialog. The
Prompt For Another option uses the standard file selection dialog
to select the file. The Name Another By Input File uses a
coordinate file name with the same name as the input file except
for a file extension of .CRD.
The special formats of Leica .d45/.gsi/.raw files, TDS .cr5
files, Topobase .ro files, Geodimeter .obs/.raw/.are files, Laser
Atlanta .txt files, Trimble .pos files, Zeiss .txt files, Traverse
PC .trv files, Maptech, Benchmark .dat files, CAICE/Caltrans .tss
files, NLS MMH360 .360 files, EMXS .xng files, and Cadvantage .cog
files can be directly imported by choosing that File Format at the
top of the dialog.