This command draws closed polylines inside lots to represent the
building setback offsets. Before running this command, the lots
need to be draw as closed polylines. The command starts with a
dialog for entering the setback offsets and the layer for the new
setback polylines. The Front to CL Max Offset is used to determine
which lot edges are frontage. The program will prompt to select CL
reference polylines and lot edges that are within this offset from
these CL polylines are considered frontage edges. The Front Setback
is applied to the lot frontage edges. The Side Setback offset is
applied to lot edges that have only one of their ends within the
frontage offset. The Back Setback offset is applied to all other
lot edges.
Lot Setback Polylines dialog
Select reference centerline polylines.
Select objects: pick the
polylines
Select lot polylines to setback.
Select objects: pick the
polylines
Pulldown Menu Location: Area/Layout
Keyboard Command: lot_setback
Prerequisite: Lot and CL polylines