The Carlson programs are loaded when the Carlson menu is loaded.
The Carlson menu is named cs##base.mnu (for AutoCAD 2005 and
earlier) or cs##base.cui (for AutoCAD 2006 and later) where the ##
is the version of AutoCAD or icadbase.mnu for IntelliCAD. For
example, in AutoCAD 2007 the Carlson menu name is cs07base.cui. The
Carlson menu is located in the Carlson SUP folder. The Carlson
installation and desktop icons should automatically setup AutoCAD
to load the Carlson menu. To manually load the Carlson menu, first
make sure that the Carlson SUP folder is listed in the Support File
Search Path under AutoCAD or IntelliCAD Options. Then run the
menuload or cuiload AutoCAD command or the menu IntelliCAD command
and load the Carlson menu. The Carlson SUP folder is under the
Windows user folder such as:
\Users\your name\appdata\roaming\Carlson
Software\Carlson_Version\CAD_Version\SUP
The Carlson menu has over 80 pull-down menus for the different
Carlson programs. Each program has its own set of pull-down menus.
The menu set for one program is active at a time. To switch current
program menu, choose the menu from Settings>Carlson Menus or
choose from the Modules toolbar.
By default, the Carlson menu is setup as the Main Customization
File in AutoCAD. To setup the Carlson menu as the partial menu,
1. Start AutoCAD with Carlson by using the Carlson desktop icon
2. Run CUILOAD and unload all the menus. Then load your Main
Customization File. Then load the Carlson menu.
3. In Carlson Configure->Startup Settings, turn on No Menu
Reset.